- liquid - ready-to-use formula
- for both interior and exterior application
- contains high quality biocides
- efficient, fast and easy to use
- penetrates the substrate deeply
- harmless to human health
Water-based agent to eliminate algae and fungi. Used to preserve and protect stone products, masonry or construction materials other than wood, e.g. infected masonry surfaces, exteriors (including thermal insulation systems), renders, concrete, lime, stones, etc.
Contains high quality biocides. For both interior and exterior application.
|Application temp.:||between +5ºC and +25ºC|
|Volumetric density:||~ 1,0 g/cm3|
|Consumption:||approx. 0,15 l/m2|
Ready to use agent, do not dilute it. Wash the infected areas under high water pressure so as to remove contamination. After drying, apply the product in large quantities with brush, paintbrush, roller or sponge - until the entire surface is wet. Leave it for at least 6-12 hours. The remaining contamination must be removed mechanically (e.g. under high water pressure). Repeat the process if necessary. The effect of the agent will be visible after about 3 days. Subsequent renovation works (e.g. painting, rendering) can be carried out after the surface is completely dry. The areas where the product was used or elements covered with the product must be ventilated until the odour vanishes completely. Only then can they be used.